How to Install Inline Duct Fan in Grow Tent

How to Install Inline Duct Fan in Grow Tent

Having an indoor grow tent could probably be the most ideal approach to start growing or a DIY farming project. There are different elements you need to consider in order to make sure you are grow room functions properly. For example, the quality of air plays a critical part in the overall growth levels of your plants. Hence, considering how to install an inline duct fan in grow tent is among a portion of the important elements to consider.

With regards to indoor cultivating, you need to be able to manage the flow of air artificially. To begin with, you need adequate airflow to help to promote the growth of your plants. It will help in maintaining the temperature while removing the pungent smell in the grow room. 

Moreover, it will help in removing any bad air. Consequently, installing inline ducts will be important for this process. In that capacity, your plants will grow solid and solid.

Basics of an Inline Duct Fan:

How does an inline duct fan work?

System of ventilating pipes at a modern factory

An inline exhaust fan is best portrayed as a fan that you install to an inline for extricating waste. Also, the fan is commonly installed in an area that will give ideal air filtration benefits. Different components become an integral factor in ensuring the efficiency of this fan. 

For example, the distance of the ducting where the air goes through will decide the limit of the fan. Likewise, the power rating of the engine and the size of your grow room also become possibly the most important factor.

Advantages of Using an Inline Fan In Grow Tent 

Decreased Noise: As you will install the fan in a proper area, the noise levels within the room you will be cleansing will be insignificant. Also, on the off chance that you have an all-around insulated rooftop space, or on the other hand, assuming you lean toward a quiet model, you will profit from the calm fans. 

Length of Duct Run: Inline fans are intended to work with ducting. It implies that they can hold a lot of the demonstrated capacities when compared with basic fans. This feature is helpful if the distance from the extraction point to the power source is considerable. 

For example, assuming you need to remove unpurified air from a grows tent, the length needs to be pretty much as short as could really be expected. Subsequently, this will help with working on the capacity of the fan to deliver clean air. 

Multiple Intake Points: With an inline fan, it is not difficult to make a few inlets or outlets by using DIY techniques. These features are pivotal when you have a huge grow room, and you need to have a few intake points.

Key Components for Creating an Inline System 

Intake Vent: The system requires an interior vent that fills in as the place of extraction for the system. Basically, these vents and grills are available in many shapes, sizes, and colors to suit specific parts of a grow room. It is all set for a short vent to help with decreasing the distance air needs to travel.

Ducting: You might require ductwork to connect the vent to the engine and later connect the engine to an external vent. There are many kinds of ducting, and the best ones for grow rooms are the flexible sorts. There are many different kinds, including semi-inflexible and insulated ducting. 

Fan: A fan is the main part of a grow tent system, and your choice of the fan depends upon many different factors. These include the size of the room and the particular applications of the fan.

Exhaust Fan Calculator: Use this to measure the extraction level needed for the system. It is recommended to have a fan with a similar distance across the length to the ducting that you use. Remember that a fan is only reasonable to use with a particular width of ducting. By decreasing the length of the fan, you will reduce the amount of work the fan needs to perform to filter the air. 

Outer Vent: This is the last part of the system, and it very well may be an external wall vent or a vent that is mounted on the rooftop. There are numerous alternatives available in this classification. 

Other Accessories: You can also install a shutter alongside the ductwork to assist with preventing issues like backflow of air. All the more along these lines, this will also help with keeping the system shut when the fan is not being used. To keep everything set up, using duct tape should do the job. All things considered, consider using duct claps to complete the process.

What Does A Ventilation System Mean for Plants? 

The basic goal of a grow room is to equip the plants with the best growing climate when compared with what is available outdoors. Hence, this implies giving a fresh supply of air with carbon dioxide. 

A ventilation system helps with maintaining the carbon dioxide levels in the grow room at ideal levels for plant development. As the grouping of carbon dioxide in the air turns out to be low, a steady flow of natural air from outside is a must. 

Plants are accustomed to growing in the climate outdoors, where they are exposed to elements and wind. At the point when they don’t have these elements, their growth can be compromised in numerous ways.

Installing an Inline Duct Fan in A Grow Tent 

While installing an inline duct fan may appear to be a difficult task, it is very easy, and you can do it yourself. You will simply need to understand a couple of key points in regards to the process.

The most critical factor to consider is that the ducts should not have any bends to make sure that the flow of air is proper.

Here are a few pointers to help you with introducing the duct fan properly:

Mount Your Inline Fan on the Tent Ceiling Bars 

When you have the tent set up, the following step is to hang the inline fan. Basically, attaching the fan to the grow tent roof bar is the most common approach. 

Consequently, consider using flexible clasps to help you with hanging the fan, and let it hang a few inches away from the ceiling. It is a process that will make sure that you have sufficient room on the ground and furthermore help to remove hot air from the upper part of the tent.

Hang the Carbon Filter 

Installing the ventilation on your grow tent may be the most difficult step with regards to setting up a grow tent. The most significant part of this process is to guarantee you install the carbon filter effectively. You might need to decide to place it inside or outside the tent. Hence, you can hang it or choose to put it in a safe spot on the floor. 

The highly acclaimed connection is to attach the filter inside the tent. 

When you attach the fan, make sure the tapered end faces the exhaust hole. Then, at that point, use the remaining straps to hang the carbon filter. Make sure that the flange end of the filter is facing the filter. Secure either end of the duct to the fan using clips. Then, fit the other section to the carbon filter. For the filter that you will put on the flow, you might need to think about an alternate technique.

Connect the Fan to the Ducting​ 

Hanging your inline fan may not be fruitful on the off chance that you fail to connect it properly to the ducting system. Hence, make sure that you connect the ducting properly with the end goal that it promotes the free movement of exhaust gases. Also, the piping needs to be immaculate and should not have any bends as this may prompt perforations. The ducting should not belong in light of the fact that the length might compromise the efficiency of the fan. 

Make sure to practice caution with the end goal that the ducting will not send light to the grow tent, which should be light-proof. In the event that you do not need light infiltrating through to your nursery, consider making a U-shaped bed assist with wiping out this issue. 

Make sure to check that the ducting goes through an exhaust opening. Also, make sure that you close the tent, particularly where the ducting exits from the structure. On the off chance that you leave it unattended, this can be a passage point for pests and a lot more issues.

Connect the Power Cords 

When you install the above parts properly, the last yet important aspect identifies with the power connection. While connecting the fan to an electric source, make sure that you practice ideal safety. 

It would be best if you affirmed that you have all parts connected effectively for the best results. 

With regards to electrical connections, we recommend you opt for a certified electrician to help with the cycle. A specialist is best since they have a good enough knowledge of the security measures needed to install it properly. For example, guarantee that you interface the fan to the right electrical plug to keep away from issues like surges.

What Does A Ventilation System Mean for Plants? 

The main objective of a grow room is to give establishes the best growing climate when compared with what is available outdoors. Subsequently, this implies giving a fresh supply of air rich in carbon dioxide. 

A ventilation system helps with keeping up with the carbon dioxide levels in the grow room at ideal levels for plant development. As the grouping of carbon dioxide present in the air becomes low, a consistent flow of fresh air from outside is a must. 

Plants are accustomed to growing in the climate outside, where they are constantly exposed to all the vital conditions of growing. At the point when they do not have these conditions, their growth can be compromised in many different ways. 

How to Install An Exhaust Fan In A Grow Tent? 

Plan The Ventilation Setup 

During this process, it is an ideal time to get the grow tent ventilation setup. It is where you face the major challenge, yet it is a very simple process. There are many grow tent ventilation setups you can take into consideration. 

That being said, the most epic method is to hang the fan and filter within the tent. On the off chance that you have small or mid-sized carbon filters, this is the best method. 

It increases your growing footprint and draws air through the filter. Such a design permits the air to move more slowly and also works on the adequacy of smell control. Simultaneously, it is a methodology that helps in the removal of hot air from the top part of the tent.

In the event that you have a carbon filter that is too huge to hang from the roof, then, at that point, place it on the floor inside the tent. This is not ideal in light of the fact that the filter might draw all the more heat air down and direct it to the plants when still in operation. It might also occupy a lot of floor space. At times, putting the filter on the floor is the best choice. 

Putting the filter and fan outside the tent is not recommended. While this technique helps save space, it has a few downsides. For example, it might push the air through the filter at high velocity, and this may decrease the viability of smell control. It might also generate noise because of the fan when set up outside. 

It is a technique that is suitable for use with huge carbon filters or when one cannot place the carbon filters on the floor. Before you start, make sure you have sufficient data on the grow room climate and ventilation system. 

A few steps associated with installing a carbon scrubber and ventilation fan include:

  • Connect the inline fan to one of the roof bars in your grow room. Consider using adjustable rope clips, which function admirably to hang the fans from roofs. 
  • Either place the inline fan over to fit easily in the exhaust opening or properly connect the inline fan to your ducting. You can run the inline fun through and out through an exhaust opening for comfort. 
  • Hang the carbon scrubber – typically, it will come with ropes to ease the installation process. 
  • Connect the carbon scrubber to the inline fan, with the end goal that the fan draws air through the scrubber. Consider using ducting or simply connect them if they are the same size. 
  • Affirm that your parts are of the right size, and place them all together. The outside air will be latently pulled in through the base intake ports and up through to the filter. 

The success of your yield reduces to the tiniest of the details. Assuming you need the best yield, you need to educate yourself in the best way possible. In this article, we have informed you how to install an inline duct fan in grow tent. At the point when you can play out this method effectively, you will see it is easy to keep up with the nature of air for your plants. An inline duct fan makes it simple to sanitize the air, and you can support its performance by using a carbon filter.

Leave a Reply

Your email address will not be published.

The Perfect Temperature and Humidity for Grow Room
Previous Post The Perfect Temperature and Humidity for Grow Room
Best Air Pump Hydroponics Reviews
Next Post Best Air Pump Hydroponics Reviews